HomeIT SupportPrintingAdding the M401 and ENR2 Konica Minolta printers to a Mac

4.4. Adding the M401 and ENR2 Konica Minolta printers to a Mac

NOTE ONE:  If you have never used the Konica Minolta printers previously with your Mac, you must first install the drivers as described here: https://ua-math-dept.helpspot.com/ITSupport/index.php?pg=kb.page&id=28

NOTE TWO: These instructions work if the login name for your Mac matches your Math username.  If this is not the case for you, open up Terminal and type whoami . Contact system@math.arizona.edu with the login name that was displayed so that we can adjust the configuration on our server.

First, make sure you are on the Math network, either via an ethernet wired connection or with the Math VPN on wireless.

1. Go to the Apple Menu, System Preferences.

2.  Choose Printers & Scanners

3.  At the left side of the Printers and Scanners window, you will see a plus sign.  Click on it.

4.  Choose IP and Internet Printing Protocol as shown below.

5.  Enter following for the printer you want to use.

Printer     Address Queue Name
ENR2 Third Floor Printer

printers/KM-ENR2 KM-ENR2
Math 401 Printer


For Use:  Pick Select Software

10.  After you choose Select Software, you will get a list of printers.  Select Konica Minolta 364e PS

11. Click OK, then Click Add.

12.  For Finisher, Select FS-533

Congratulations, you have added the printer!

This page was: Helpful | Not Helpful