• Home
• Contact IT Support

• Knowledge Base
• Math IT Support

Math IT Support → Printing → Adding the M401 and ENR2 Konica Printers to a Windows Computer

3.2. Adding the M401 and ENR2 Konica Printers to a Windows Computer

NOTE: These instructions work if the login name for your PC matches your Math username.  If this is not the case for you, please open up a command prompt and type whoami  Contact math-system@arizona.edu with the login name that was displayed.

First, download and extract the driver for a personal computer: 

1. Go here to download the zip file.  You will need to be logged in to your Math Google account.  Click on the download icon    
2. After you have downloaded the zip file, extract the files, but do not run any installers.
3. In step below, when it asks you to select a printer,  choose  Have Disk and browse to this directory  (in the files you just downloaded) \Drivers\PCL\EN\Win_x64
4. Choose KOAXDJ__.inf
5. It should then have the Konica Minolta as a choice.

Next, make sure you are on the Math network, either via an ethernet wired connection or with the UA VPN for Math (click here)  on wireless.

Then, add/install the printer and drivers: 

Open Control Panel > Hardware and Sound > Devices and Printers > and click on Add a printer

Note:  If you are on Windows 10 and can't find the Control Panel,  search for it in the search box. Then look for Devices and Printers.

Next, click on Add a network, wireless or Bluetooth printer  (this window may not appear on Windows 10 - go to the next step)

Click on The printer that I want isn't listed

Next, click on Select a shared printer by name and enter the correct path to the printer in the field below the button.  

In the next window, Click on Have Disk and navigate to the KOAXDJ__.inf file (as noted in step 3 above) , select KONICA MINOLTA as the Manufacturer, and KONICA MINOLTA 650iSeriesPCL as the Printer.

Click on OK.  The next window that pops up will tell you that you've successfully added the printer.  But wait, there's still more...

Click on Next, then you'll be given a change to print a test page.  Click on Finish and you're almost done.

Last, Set Model and Finisher Settings: 

Right click the printer, select printer properties, select configure tab, under device option, select Model, under setting, select 360i, click Apply.

Next, under device option, select Finisher, under setting, select FS-533, click OK.

Congratulations, you have installed the Konica Minolta BizHub 360i printer/copier!🥳